Alta Calidad Máquina de procesamiento de desechos de la ciudad, Equipo de manejo de desechos , Equipo de gestión de residuos Proveedores en China

Home > Lista de Producto > Máquina de procesamiento de desechos de la ciudad > HuaYin Company 10T desperdicio de energía sin emisión

HuaYin Company 10T desperdicio de energía sin emisión

Descripción del producto


orte
                          HuaYin Company 10T Waste To Energy With No Emission
  • HuaYin is specializing in manufacture waste tires pyrolysis plant, waste plastics pyrolysis plant and oil distillation plant.
  • Factory was build in 1993.
  • Have running plant factory, welcome to visit us.
  •  Turn waste into wealth with green technology, no pollution,
  • Help you choose the best and profitable machine.
  • Send experienced engineer instruct you install the machine, and help you training your workers..

Frequently Asked Questions

Answers
Input Waste complete tires, shredded tires, waste rubbers
Output Average 45%-50% crude oil, 30% carbon black, 15% steel wire
Products usage

Crude oil--- use as industrial fuel for heating.

Carbon black---sell to  brick and coal briquette factory directly or make further process into carbon black briquette for burning.

Steel wire---sell to iron and steel factory directly

10 ton capacity(D2800*L6000)

Machine Cover Area

400 square meters=4305 square feets

(With auto feeder: 10 meters width, 40 meters  length  )

                               33 feet  width , 131 feet  length (Without auto feeder: 10 meters width, 30 meters length)

                                    33 feet width, 98 meters length

Installation Will dispatch one of our technical engineer to your place, guiding you install the machine, debug the machine and training your workers
During operation workers needed 4 workers are enough
Complete process time

 From loading raw material into reactor until carbon black discharging totally around 20 hours

2 hours loading raw material into reactor through our auto feeder

4 hours preheating

12 continuous hours oil ouput

2 hours reactor cooling down

1 hour carbon black discharging

1 hour steel wire collecting

Heating material Coal / Wood / Fuel oil / Natural gas
Machine Weight

 Reactor: 23 Ton

Other Accessories: 10 Ton

Packing

Reactor in one 40' flat rack container

Other accessories in one 40' high cube container

Demo plant factory 6 sets of running demo plants
Certificates CE&ISO&BV&SGS
Demo plant factory of Waste Tire Pyrolysis Plant

 

 

 

50Ton Hydraulic Auto feeder

  Through this device

  • No need shred tires, could loading complete tires directly
  • Begain another batch directly,no need wait the temperature cooling down, use residual heat advantage
  • No need manpower go inside reactor, safety
  • 2-3 hours could finish loading, high efficiency
  • 50 ton hydraulic, powerful, could make full use of the reactor room
Three Steps Cooling system

Waste Tire Pyrolysis Plant Cooling system directly related with the oil yield rate

For our cooling system, we have three steps

First setp, cooling pipe.

Two layers, inner will be oil gas, out side will be covered by water, here heavy oil

will be recycled, go into first heavy oil tank through oil-water separator.

Second step, Condenser. We have two different design---- Horizontal condenser

and Vertical condenser.

Each condenser has 57 small gas pipes inside. Water will be outside and covered

all these 57 small pipes, heat will be flowed out together with the flowing water.

Here light oil will be recycled, go into second light oil tank.

Third step, residual gas cooling system, here the oil quality is very good, also go

into second light oil tank.

Through these three steps, cooling effect could be guaranteed, as well as oil yield

rate.

Cooling pipe

Vertical condenser

Horizontal condenser

Reactor

Reactor directly decides the machine's safety and service life.

  • Bare reactor, inner and outside are welded by auto-wedling machine.
  • Inlet and output are in one central line, and supported by rollers, in this way, could make it running stabile, even after long time steel plate deformed.
  • Use standard gear, which is separate from reactor instead of welding on reactor, could avoid deformation after long time heating.
  • Outside cover has three layers, use special insulation material, could achieve a good effect of heat preservation.
  • Made by Q345R boiler plate, safety and long service life.

 

Certifications

                                                                     

 

Produce Flow

Customer Site

Services

 

  • We will send one of our engineer to your factory, instruct you install and testing the machine, help you training your workers.
  • Warrenty will be one year.
  • Produce machine according to your special request.
About US
Honesty is our first principle in international trade. Huayin pay much attention to technology improvement, environmental protection, security in production and professional service. Looking forward to have further cooperation with you.
 
  HUAYIN- God will be always with us and bestow us the Gospel.

Grupos de Producto : Máquina de procesamiento de desechos de la ciudad